Archive for August, 2009

Redline Complete Brake Packages

August 28, 2009

Sometimes you just don’t know which pads, rotors or lines to get. We’ve gone ahead and made your life a little easier by carefully creating some of the best brake packages for your vehicle.

Check out the brake packages we’ve put together for the BMW 335i and VW MkV GTI.

All packages include Rotora Rotors (your choice of solid, slotted or drilled and slotted), Agency Power Stainless Steel brake lines, Brake Pads and Motul Dot 4 Synthetic Brake Fluid.

335i Street Package

335i Track Package

MkV GTI Brake Package


GruppeM Carbon Fiber Intake Systems

August 24, 2009

When it comes to high quality carbon fiber intakes that produce power, GruppeM is the first and only name that comes to mind.

Redline is pleased to announce the addition of GruppeM to our powerful line-up of aftermarket brands.

Each intake is custom made to meet the specifications of each individual car. These systems all feature enclosed airboxes to lower the inlet temperatures by insulating the filter from the heat developed by the engine. This ensures almost all of the air running through the intake system is as cold as possible. Colder air means denser air which results in more power since a greater amount of fuel can be added to the combustion chamber.

See the entire line of GruppeM intakes here.

Redline Motorworks at Vagkraft 09

August 19, 2009

Redline Motorworks sponsored the Vagkraft show held in Brampton. It’s only the third year running but there was quite a turnout!

We had our project GTI and newly acquired Audi S5 on display.

Check out the gallery below for a few pictures we managed to snap during the day.

It was great meeting some of our local customers. See you next year!

Vorsteiner M3 GTS3 Front Bumper and Hood

August 14, 2009

Introducing the newest addition to the Vorsteiner line up: the GTS3 Vented Hood and Front Bumper for the M3.

The front bumper is designed to function with both the E90 Sedan and E92 Coupe /E93 Cabrio. It utilizes all factory mounting points, screws, grills and ducting. It has a lower center mouth opening that extends further and lower than the OEM bumper. Finally, it features a 1 piece carbon fiber lip.

It is available in Full Carbon Fiber or DVWP with a Carbon Fiber Lip.

The vented race hood for the E92 Coupe /E93 Cabrio M3 is the finish touch for your M. Like the front bumper, all factory mounting points, screws and shocks are used so no modifications are required. It features a center hood dome with the fully functional vents to release heat developed by the engine.

It is available in both single sided or double sided carbon fiber.

Feel free to contact us for pricing on either of these products. We are now taking orders. Check out the entire Vorsteiner line on our website.







BSH Inventory Arrival…just in time for Vagkraft

August 13, 2009

It’s always fun when the delivery man knocks on your door with car parts isn’t it?

Check out the BSH goodies we received for the Vagkraft show we’re sponsoring this Sunday.

Box Contents:

(2) Stage 2 PCV VW Kits
(2) Stage 2 PCV B7 Kits
(2) Stage 2+ PCV VW Kits
(2) FSI Intakes
(2) TSI Stage 1 Intakes
(1) TSI Stage 2 Pipe
(4) Torque Arm Inserts

This stuff was packaged insanely well. Arizona to Toronto in 6 business days and in perfect condition just in time for the show. Thanks BSH!


Digging around


What's under those heat shields?

First 'layer' of parts

First 'layer' of parts


PCV Stage 2 and 2+ Kits!


More peanuts than the UPS store itself!


Hoses, Couplers and Clamps

Ever wondered how a Differential worked?

August 10, 2009

Check out this old but very informative video on understanding how a differential works. Feel free to skip to 1:50…

Miro 935 Wheels | Customer Pictures

August 10, 2009

Here are a few pictures our customer in New York sent us of his brand new Miro 935 wheels we set him up with. These wheels are extremely classy and are not over-the-top.

They are 19×8.5 ET35 and 19×9.5 ET33 and feature a machined face with silver spokes. This setup sits perfectly flush with the fenders and works very well with both stock and lowered vehicles.

To pick up your own set for your E90/E92/E93 3 series, give us a call at 647-827-0825.

Miro 935 Wheels

Miro 935 Wheels

Miro 935 Wheels

Miro 935 Wheels

Miro 935 Wheels

Miro 935 Wheels

New Products for the 997 Turbo from Agency Power

August 8, 2009

Agency Power has just released a few hot new items for all the Porsche 997 Turbo owners out there. Redline Motorworks is direct with Agency Power which allows us to give our customers the best pricing possible.

Agency Power 997 Turbo Muffler

Turbocharged cars do not need any back pressure and ideally perform best with no restriction off of the turbo exhaust outlet. However, this would cause your car to be incredibly loud and not comfortable for daily use.

Agency Power has developed this exhaust system to give Porsche 997 Turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range.

The exhaust features high flow 200 cell catalytic converters which work with the factory O2 primary and secondary sensors to not throw a check engine light. The all 304 stainless steel is mechanically TIG welded and then mirror polished for a final product that only belongs on a exotic car like the Porsche.

Customers who purchase this exhaust will enjoy weight savings of 50% and gains of 21 AWHP and 32 lb-ft of torque.

Check out more information about the exhaust here.

Agency Power 997 Turbo Muffler

Agency Power 997 Turbo Boost Recirculation Valves

These new boost recirculation valves from Agency Power are perfect for any 997 Turbo. These are a must-have if you are running a more aggressive tune or bigger turbos.

Like on the older 996 Turbo, the stock valves use a rubber diaphragm which will leak boost in the higher RPM range. This part also deteriorates over time leading to boost failure. The new Agency Power BRV uses a piston and spring design which holds boost pressure all the way to redline and with the VTG design, helps boost come in stronger.

Each valve has been CNC machined from 6061 aluminum. The base of the valve was precision engineered down to the ten-thousandth to fit into the stock VTG turbocharger. You have your choice of black or blue.

You can purchase them here.

Agency Power Boost Recirculation Valves

Need a bigger can? BSH PCV Stage 2+

August 7, 2009

Introducing the newest product from BSH, the PCV Stage 2 Plus kit.

BSH Stage 2+

BSH Stage 2+

The holding capacity of this new can is increased from 7 fluid ounces to a whopping 32 fluid ounces.

A natural byproduct of the crank case ventilation system is oil vapor making its way back into the intake. These gasses are recirculated back into the intake for emissions compliance. On factory cars where performance is only one piece of the puzzle this is no problem. However when the goal is to have best performance possible these vapors have to go! By allowing oil vapors to enter the combustion chamber you increase your chances for detonation significantly. Oil vapors will also gum up the intake valves over time. Direct injection engines are much more susceptible to this than port injection engines of the past as they do not have fuel passing over the valves continuously to wash them clean.

BSH recirculating catch can systems catch oil vapors and still fully meet emission requirements. Internally the incoming vapor is forced to make a 120* turn through a high volume chamber baffled with aluminum mesh that forces oil vapors to condense and to separate from the air as it passes through. This oil then falls into the gut of the can and can be drained easily at your convenience.

On top of doing everything mentioned above, this kit also remedies the very common PCV issue. Symptoms of this failure are a noticeable loss in performance, a decrease in gas mileage, rough idle, and oil being blown out of the oil cap. This kit solves this once and for all!

Everything is included to install. For those of you who already have the original stage 2 kit and want to upgrade, we have a kit for that as well. Click here for the upgrade kit.

BSH Stage 2+

BSH Stage 2+

Redline is now on Twitter & Facebook!

August 4, 2009

Redline Motorworks is now on the two very popular twitter and Facebook websites.

Follow Us on Twitter HERE

Friend Us on Facebook HERE